FLProg

Visual programming for not programmers

Яндекс.Метрика
Block signal converter K type thermocouple MAX6675


Block is used to retrieve values from the signal Converter K type thermocouple MAX6675


Basic Specifications

Supply Voltage 3.3. to 5 VDC
Operating Current about 50mA
Measurement Range 0 to 1024 deg C (32 deg F to 1875 F)
Measurement Resolution +/- 0.25 Deg C (+/- 0.45 Deg F)
Required SENSOR K Thermocouple

Wiring diagram


You can connect as many boards MAX6675, as you have pins on the Arduino. This will combine the SCK and SO pins from all boards and contacts CS connect to separate pins on the Arduino.

Block is configured using the editor


In the block settings you need to choose the pins to which it connects the Converter. You can also choose what units will be displayed the readings in Celsius or Fahrenheit.
This Converter can be polled at most once in 500 milliseconds. If you need a rare survey of the Converter that can be configured in the block editor.
Selecting "Enable input of the poll" the transmitter will be polled only when there is a log. 1 on this input.